Chapter 3 64
6.
Snap off the bezel carefully, and then remove the LCD bezel from the LCD module.
Removing the Inverter Board
1.
See “Removing the Battery Pack” on page 56
2.
See “Removing the Middle Cover” on page 61
3.
See “Removing the Keyboard” on page 62
4.
See “Removing the LCD Module” on page 62
5.
See “Removing the LCD Bezel” on page 63
6.
To remove the inverter board, first remove the screw from the inverter board.
7.
Disconnect the LCD power cable, remove the inverter board from the LCD panel, and then disconnect the
inverter cable from the inverter board.
To Next Page
Loading...
