Acer Aspire 1600 - Expansion Devices

67 Aspire 1600
Disassembling the Main Unit
Removing the Keyboard Bracket
1.
See “Removing the Battery Pack” on page 56
2.
See “Removing the Middle Cover” on page 61
3.
See “Removing the Keyboard” on page 62
4.
Remove the keyboard support bracket from the main unit carefully.
Removing the DC Charger Plate
1.
See “Removing the Battery Pack” on page 56
2.
See “Removing the Middle Cover” on page 61
3.
See “Removing the Keyboard” on page 62
4.
See “Removing the LCD Module” on page 62
5.
Remove the two screws as shown and then detach the DC charger Plate from the main board.
Removing the RTC Battery
1.
See “Removing the Battery Pack” on page 56
2.
See “Removing the Middle Cover” on page 61
3.
See “Removing the Keyboard” on page 62
4.
See “Removing the Keyboard Bracket” on page 67
5.
See “Removing the DC Charger Plate” on page 67
6.
Disconnect the RTC cable and then remove the RTC battery from the upper case gently.