Chapter 3 55
3. Remove the card from the slot.
Removing the Lower Cover
1. See “Removing the Battery Pack” on page 53.
2. Turn the base unit over, then loosen the eight screws (A) on the lower cover.
3. Use a plastic flat-blade screwdriver to pry open the lower cover.
Step Size (Quantity) Color Torque
1~8 M2 x L4 Black 1.6 kgf-cm
SG_Aspire4920_Book.book Page 55 Monday, May 28, 2007 6:49 PM
To Next Page
Loading...
