68 Chapter 3
7. Detach the mylar tape from the media board.
8. Carefully insert the flat-blade screwdriver under the side of the media board cover and gently pry up the
board until it releases from the cover.
9. Remove the media board.
Removing the LCD Module
1. See “Removing the Battery Pack” on page 53.
2. See “Removing the Lower Cover” on page 55.
3. See “Removing the Keyboard” on page 64.
4. See “Removing the Middle Cover” on page 65.
5. Disconnect the microphone cable from the mainboard.
SG_Aspire4920_Book.book Page 68 Monday, May 28, 2007 6:49 PM
To Next Page
Loading...
