36 Chapter 3
WinFlash Utility
Perform the following steps to use the WinFlash Utility:
1. The flash utility is stored on the hard drive and is based on BIOS V.3208.
2. THe BIOS flash package includes the following files:
• ZK6_3208.WPH is the BIOS rom
• WinPhlash1.6.8.8 is the BIOS windows flash tool
3. Execute " WinPhlash1.6.8.8" to update the BIOS, then choose " ZK6_3208.WPH " to continue.
NOTE: If the AC adapter is not plugged in the following message appears. Plug the AC source in and run the
program again.
4. Please wait 5~10 seconds to launch BIOS Windows Flash application.
5. Click Flash BIOS.
To Next Page
Loading...
