84 Chapter 3
WARNING:To prevent damage to the Thermal Module or the CPU, hold and lift the Thermal Module by lifting
both ends up and away at the same time.
6. Hold the module on both sides and lift it clear of the Mainboard.
IMPORTANT:If the replacement Thermal Module does not include the thermal protection pads shown below,
reuse the original thermal protection pad with the new Thermal Module.
Removing the CPU (Alternate Procedure)
NOTE: Use this procedure only if you are unable to remove the CPU safely as described in “Removing the
CPU” on page 60.
1. See “Removing the Thermal Module” on page 82.
To Next Page
Loading...
