21 Chapter 2
Product Information
The screen below appears if you select Product Information from the main menu:
The Product Information menu contains general data about the system, such as the product name,
serial number, BIOS version, etc. These information is necessary for troubleshooting (may be required
when asking for technical support).
The following table describes the parameters found in this menu:
Parameter Description
Product Name Displays the model name on your system
System S/N Displays the system’s S/N
Main Board S/N Displays your main board’s serial number
System BIOS Version Specifies the version of your BIOS utility
SMBIOS Version The System Management Interface (SM) BIOS
allows you to check your system hardware
components without actually opening your system.
Hardware checking is done via software during start
up. This parameter specifies the version of the
SMBIOS utility installed in your system
BIOS Release Date Displays the release date of the BIOS utility
MMM DD,YYYY
To Next Page
Loading...
