Acer Aspire T130 - Chapter 3 Machine Disassembly and Replacement

Chapter 3 47
To disassemble the computer, you need the following tools:
T Wrist grounding strap and conductive mat for preventing electrostatic discharge.
T A flat screw driver
T Phillips screwdriver (may require different size).
NOTE: The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatches when putting back the components.
NOTE: The Aspire T130 mechanical housing is similar to AcerPower F1. Therefore, this chapter base on F1
to have minor rectify but the CPU and Heatsink are different between the two models.
Machine Disassembly and Replacement
Chapter 3