Chapter 3 53
4. Remove the power supply.
Removing the Heatsink and the CPU ( for T130)
1. First of all, disconnect the CPU fan power cable.
2. Remove the 4 screws first.
3. Take the CPU fan after you remove screws.
4. Press the latch outward with a flat screw driver to release it.
5. Then hold the both sides to take the latch and heatsink away.
6. Take the retention module away.
7. Pull the CPU bar up to 90 degrees.
8. Then take the CPU away from mainboard.
To Next Page
Loading...
