Acer Aspire T130 - Installing the CPU and Heatsink Module; Installing the Memory; Installing the Power Supply

Chapter 3 57
2. Secure the motherboard with the six screw as shown here.
Installing the Heatsink and the CPU (please refer to disassemble photos)
1. Place the CPU to the CPU socket.
2. Place the rentention module next to previous installing.
3. Place the heatsink then hook the latch to the tabs.
4. Then place the CPU fan on the heatsink.
Installing the Memory
1. Insert the memory to the DIMM slot as shown here.
Installing the Power Supply
1. Place the power supply to the original position as shown here.
2. Secure the power supply with the four screws as shown here.
3. Connect the Pentium 4(ATX-12V) power connector to the motherboard as shown here.