Chapter 3 51
2. Disconnect the CD-In cable.
3. Disconnect the floppy cable.
4. Disconnect the IDE1 and IDE2 cable.
Removing the Modem card, CD-ROM, Floppy and HDD
NOTE: There have the hook lock on CD-ROM, floppy and HDD cage, in other words, please move a
little bit forward to release the lock then you can disassemble these parts smoothly.
1. Detach the modem card.
2. Disconnect the CD-ROM power, IDE and CD-In cables.
3. Disconnect the floppy cable and power cable.
4. Disconnect the HDD power cable and IDE cable.
To Next Page
Loading...
