33 Chapter 2
Onboard SuperIO Device
Scroll this item and press <Enter> to view the following screen:
Parameter Description Option
Onboard FDC Controller This option enables the onboard floppy disk drive
controller.
Disabled
Enabled
Onboard Serial Port 1 This option is used to assign the I/O address and
interrupt request (IRQ) for the onboard serial port 1
(COM1).
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Onboard Serial Port 2 This option is used to assign the I/O address and
interrupt request (IRQ) for the onboard serial port 2
(COM2).
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Onboard Parallel Port This option is used to assign the I/O address and
interrupt request (IRQ) for the onboard parallel port.
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
To Next Page
Loading...
