Chapter 5 78
Jumper and Connector Settings
The following illustration shows the location of the mainboard jumpers. Pin 1 is labeled.
Jumper Type Description Setting(default) Illustrator
JP1 3-pin Clear CMOS
Use this jumper to clear the
contents of the CMOS memory.
You may need to clear the
CMOS memory if the settings in
the Setup Utility are incorrect
and prevent your mainboard
1-2:Normal
2-3:Clear CMOS
JP3 3-pin BIOS Protect 1-2: Disable
2-3:Enable
JP1
1
JP2
1
To Next Page
Loading...
