42
Software Utilities
Quick Way to Execute AFlash
When you have already copied the AFlash files into your hard disk, you can
simply type the following on the DOS prompt (subdirectory where the files are
located) to quickly execute the program.
aflash (file name)
Enter
The program automatically performs the loading and programming functions,
then reboots the system.
If the program cannot find the BIOS file, it returns to the main menu and
flashes the following message:
Can’t Read This File!!! Press any key to continue.....
In this case, follow the procedures for loading and programming the BIOS file
using the main menu.
To Next Page
Loading...
