11
Chapter 2. Basic Call Functions
2.1 One-Touch Dialing
There are two ways for you to do one-touch dialing while in stand-by mode:
♦ You can long press (or ) key. The last number you dialed will be
sent out directly.
♦ You can use the first 9 record saved in the phone book by pressing the
location of the desired number. For instance, if the storage location is 5,
press 5 key to initiate the call. The name and number will appear on the
screen when sending out the call. For details, please refer to Phone Book
on page 17.
2.2 Make an International Call
♦ Enter the outgoing national code, or press key for about 1 second
until “+” shows up on the display.
♦ Enter the national code, area code and phone number of that call. Send
out your call by pressing (or ) key. When dialing, please omit the
first zero of receiver’s area code.
2.3 Make an Emergency Call
Enter 112 (the international emergency number) and press (or ) key.
The call will be sent out. This 112 number can be used in any country despite if
a SIM card is available, as long as you are included in a GSM network.
2.4 Make a Voice Mail Call
Long press 0 and you will link to your voice mail center directly. For details,
please refer to page 24.
To Next Page
Loading...
