36
Manual Selection (5-2)
Manual selection shows connectable networks and allows you link to the one
you desire.
After you enter this function by pressing (or ) key, press (or ) key
again to confirm.
3.6 Security Settings (6)
Set Code Status (6-1)
The code status includes:
PIN code (6-1-1)
You can activate/deactivate the PIN code function here.
After you enter this function by pressing (or ) key, press (or
) key again and the screen will display two options: “on” and “Off”.
Use (or ) key to select and press (or ) key to
confirm. When you change the PIN code status, you will be prompted to
enter PIN.
Phone Code (6-1-2)
You can activate/deactivate the Phone Code function here.
After you enter this function by pressing (or ) key, (or )
key again and the screen will display two options: “on” and “Off”. Use
(or ) key to select and press (or ) key to confirm.
When changing the Activate/Deactivate status, you have to enter your
phone code. (The default phone code is 1234).
To Next Page
Loading...
