Why isn't my Acer Projector displaying my presentation from my notebook?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is my Acer Projector image blurry?
The image may be out of focus because the lens cap is still on. Remove it. You may also need to adjust the focus ring on the projector lens. Check that the projection screen is within the required distance from the projector.
What to do if Acer Projector stops responding?
If your Acer Projector stops responding to all controls, turn off the projector if possible, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is my Acer H6800BD image partial or scrolling on my notebook?
To resolve a partial, scrolling, or incorrectly displayed image on your notebook, follow the steps to adjust the resolution of your computer. Press the toggle output settings. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
How to correct slanted image sides on Acer H6800BD Projector?
To fix slanted sides, try repositioning the projector so that it is centered on the screen, if possible. Alternatively, press the "Keystone / " button on the remote control until the sides are vertical.
What does it mean if my Acer Projector lamp burns out or pops?
When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced.
How to fix Wifi or Bluetooth cannot be detected normally on Acer H6800BD Projector?
To fix the problem when Wifi or Bluetooth cannot be detected normally on Acer Projector, plug in wifi dongle again and restart projector.
What to do if my Acer H6800BD Projector image is too small or too large?
If the image on your Acer Projector is too small or too large, try the following: * Adjust the zoom ring on the projector. * Move the projector closer to or further from the screen. * Press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings or press "RATIO" on the remote control to adjust directly.
How to adjust the screen size on Acer Projector?
To adjust the image size, try the following: adjust the zoom ring on the projector; move the projector closer to or further from the screen; or press "MENU" on the remote control, go to "Image - -> Aspect Ratio" and try different settings or press "RATIO" on the remote control to adjust directly.
What to do if Acer H6800BD Projector LAN/WiFi, USB Display source show no signal?
If your Acer Projector's LAN/WiFi or USB Display source shows no signal, power off the projector and then power it on again.
To Next Page
General
