How to fix Acer Projector when no image appears onscreen?
First, ensure the projector is connected as described in the "Getting Started" section and that none of the connector pins are bent or broken. Then, check if the projector lamp has been securely installed. Also, make sure you have removed the lens cap and the projector is switched on.
What to do if my Acer H9505BD image is out of focus?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance of 4.9 to 33.3 feet (1.5 to 10.1 meters) (WXGA series) /4.9 to 32.6 feet (1.5 to 9.9 meters) (1080P series) / 4.9 to 31.7 feet (1.5 to 9.7 meters) (WUXGA series) from the projector.
Why is my Acer H9505BD image too small or too large?
Adjust the zoom ring on the top of the projector. You may also need to move the projector closer to or further from the screen. Another option is to press "MENU" on the remote control or on the control panel, go to "Image --> Aspect Ratio" and try different settings.
How to fix slanted sides on Acer H9505BD Projector image?
If possible, reposition the projector so that it is centered on the screen. You can also press the "Keystone / " on the control panel or on the remote control until the sides are vertical. Alternatively, press the "Keystone" on the OSD until the sides are vertical.
What to do if Acer H9505BD Projector image is reversed?
Select "Image --> Projection" on the OSD and adjust the projection direction.
How to troubleshoot partial, scrolling, or incorrectly displayed image on Acer Projector with notebooks?
First, press "RESYNC" on the remote control or control panel. For an incorrectly displayed image: Follow the steps for item 2 (above) to adjust the resolution of your computer. Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]. If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
What to do if my Acer H9505BD Projector stops responding to all controls?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is the screen of the notebook computer not displaying my presentation on Acer H9505BD Projector?
If you are using a Microsoft® Windows® based notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. If you are using an Apple® Mac® OS based notebook: In System Preferences, open Display and select Video Mirroring "On".
Why is my Acer Projector image stretched when displaying a "widescreen" DVD title?
When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings: * If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. * If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player. * If you play an Letterbox (LBX) format DVD title, please change the format to Letterbox (LBX) in the projector OSD.
How to fix unstable or flickering image on Acer H9505BD?
Adjust the "Tracking" to correct it. Change the display color depth settings on your computer.
General| Display Technology | DLP |
|---|---|
| Resolution | 1920x1080 (Full HD) |
| Contrast Ratio | 10000:1 |
| Connectivity | HDMI, VGA, USB, RS232 |
| 3D Capability | Yes |
| Projection Size | 30" - 300" |
Steps to safely turn off the projector for cleaning.
Guidelines for connecting and disconnecting the power supply unit.
Ensuring easy access to the power outlet for disconnection.
Guidelines for safe and proper use of electrical power.
Instructions and warnings regarding product servicing by qualified personnel.
Important safety guidelines for operation and placement.
Instructions to protect hearing while using the projector.
Guidance on proper disposal of electronic devices.
Information about mercury content in lamps and disposal.
Important notes on projector usage and handling.
General precautions to maximize projector life and ensure safety.
Key features and technologies of the DLP projector.
List of items included in the projector package.
Visual identification of projector's front and top components.
Detailed description of all ports and connectors on the rear of the projector.
Description and functions of the projector's control panel buttons.
Identification and functions of remote control buttons.
Step-by-step guide to connecting various devices to the projector.
Instructions for powering the projector on and off safely.
Detailed steps and indicators for shutting down the projector.
How to adjust the image height using projector feet and wheels.
Table and guide for achieving optimal image size based on distance.
Guide to adjust image size using distance and zoom settings.
Using lens shift rings to adjust image position without moving the projector.
Details on adjusting image position horizontally and vertically.
Accessing and using the OSD installation menu for setup.
Navigating and using the projector's OSD for settings.
Adjusting color settings like display mode, brightness, contrast, and tint.
Advanced image settings including color management and noise reduction.
Settings for image projection, aspect ratio, sharpness, and tracking.
Customizing the projector's startup screen.
Capturing an image to use as a custom startup screen.
Managing input signal source selection and locking.
Selecting and configuring closed captioning modes.
Adjusting electronic screen movement with projector power.
Enabling VGA output during standby mode.
Enabling and configuring LAN/WiFi connections for projector control.
Identifying and setting network IP and Mask addresses.
Resetting the projector's LAN settings to default.
Resetting all projector settings to factory defaults.
Enabling and configuring projector security functions.
Setting the time interval before password prompt.
Setting up and managing user passwords for projector operation.
Setting up and managing administrator passwords and recovery.
Preventing unauthorized changes to the startup screen.
Enabling ECO mode for lower power consumption and extended lamp life.
Activating High Altitude mode for cooling in elevated environments.
Configuring instant off and resume functions for the projector.
Setting and managing the projector's timer functions.
Configuring automatic shutdown when no signal is detected.
Displaying the projector lamp's elapsed operating time.
Setting up reminders for lamp replacement.
Resetting the lamp hour counter after replacement.
Adjusting the projector's audio volume.
Muting or unmuting the projector's audio output.
Adjusting notification volume for power on/off events.
Adjusting the volume for warning notifications.
Enabling and configuring DLP 3D functionality.
Setting frame rate compatibility for 3D glasses.
Converting 2D content to 3D for enhanced viewing.
Selecting appropriate 3D format for correct display.
Inverting left/right image sequences for proper 3D display.
Enabling or disabling 3D display warning messages.
Selecting the preferred language for the OSD menu.
Guide to diagnose and resolve common projector problems.
Detailed solutions for image display issues like stretching or flickering.
Solutions for projector-level issues like unresponsiveness or lamp problems.
Explanations of various onscreen messages and their meanings.
Explanation of LED indicators and alarm definitions.
Procedures for cleaning and replacing projector dust filters.
Step-by-step instructions for safely replacing the projector lamp.
Guide for securely installing the projector using a ceiling mount kit.
Information on the type of lamp used in the projector.
Specification for keystone correction range.
Specification for the projector's audio output.
Physical weight of the projector.
Physical dimensions of the projector.
Specification for the projector's digital zoom capability.
Power input requirements for the projector.
Power usage details for different operating modes.
Specified operating temperature range for the projector.
List and description of all input/output ports on the projector.
List of all items included in the standard projector package.
Compatibility modes for VGA analog input signals.
Compatibility modes for HDMI digital input signals.
Compliance information regarding FCC regulations for Class B devices.
Requirement for using shielded cables for peripheral connections.
Guidelines for attaching certified peripheral devices.
Warning about unauthorized modifications voiding user authority.
Conditions under which the device operates according to FCC rules.
Compliance notice for Canadian users.
Statement of compliance with EU directives.
Regulatory information for wireless LAN and Bluetooth modules.
General compliance with radio frequency and safety standards.
Specific regulations for low-power radio devices in Canada.
To Next Page
