Chapter2 18
No Step Procedure Photo
7 Check the
whole process
1. In the "Read Item"
Selections, choose the
Port that you use.
Ex: If you use the Analog
Port, choose "Analog" in
the "Read Item".
Note: If the code in the
Serial Blank is scrambled,
please make a check in
"Trans".
2. Click on "Read" to read
EDID information.
3. The "EDID Informations"
will show the result.
4. Click "Reset" to do the
next unit or "Exit" to close
the EDID program.
Note
1
2
3
4
To Next Page
Loading...
