15
ACER S230HL
1. Product Specification
Go to contents page
1.5.3 Response time:
The response time is defined as below:
Tr + Tf : 5 msec typ.
Remark: Optical response time vs gray scale.Test condition: brightness set to max, and contrast set to default.
1.5.4 Viewing angles:
The viewing angles are measured at CR >=10 as below :
Horizontal Left: 85 degrees typ.; Right: 85 degrees typ.
Vertical Up: 75 degrees typ.; Down: 85 degrees typ.
1.5.5 Chromaticity:
The color chromaticity is measured by a photometer (CA-210) at 1920x1080/60Hz mode and full white square
pattern with contrast/brightness in default value. The x and y co-ordinates for Reddish, Bluish and User preset
mode shall be as below:
Reddish Preset :
x=0.313 ± 0.015
y=0.329 ± 0.015
Bluish Preset :
x=0.283 ± 0.015
y=0.297 ± 0.015
To Next Page
Loading...
