Acer S230HL

ACER S230HL 50
Go to contents page
7. Writing EDID Process
7.3 How to Set Up Language Are a
A. Entery Facotory Mode by
i. Press ePower Key + Power Key in Power Off.
ii. Select F Item in Menu Menu
Figure 1 Main Menu with Factory Mode Enabled Figure 2 Factory Menu
B. Go To Region Item and Select according the following table.
Figure 3 Language Set
Note: Please Do NOT Change any Other Value in Factory Mode, Unless mentioned in Service Menu.
Value Language Set
0 EMEA
1 Non-EMEA
2 Russia