41
ACER S230HL
Go to contents page
4. Assembly and Disassembly Procedures
S4
Removing the
Acetate cloth tapes afterward separate the connector of the
Panel power cable
from the connector of panel and the connector of main
Board.
(Tape 1:20*45, Tape 2:12*30mm)
S5
1: Tearing the Aluminium tapes from the wire cable of OSD key. (ALUMINIUM TAPE =
21*61mm)
2: Separating the connector of wire cable of OSD key from the connector of main board.
To Next Page
Loading...
