Acer UL6500 - Page 24

23
PICTURE
Picture Mode
• Standard: For standard image
• Presentation: Brightens portions of image for more enhanced presentations.
• Movie: Gives natural tint to the projected image.
• Bright: Use in bright places.
Brightness
Press for less brightness, press for more brightness.
Contrast
Press for less contrast, press for more contrast.
Color Temperature
• Cool: For lower color temperature for warmer, reddish incandescent-like images.
• Normal: For normal color temperature.
• Warm: For higher color temperature for cooler, bluish, fluorescent-like images.
• R Gain: Press for less contrast in red color, press for more contrast in red
color
• G Gain: Press for less contrast in green color, press for more contrast in green
color.
• B Gain: Press for less contrast in blue color, press for mores contrast in blue
color.
• R Offset: Press for less brightness in red color, press for more brightness in
red color.
• G Offset: Press for less brightness in green color, press for more brightness in
green color.
• B Offset: Press for less brightness in blue color, press for more brightness in
blue color.
Overscan
This function allows you to adjust the overscan area (display area).
• Off: The whole input area is displayed.
• 1 - 5: The input area is displayed without the screen edges.
Note
• This function is available for the following signals.
With COMPUTER/HDMI 1 or 2 input for component signal:
- 480P, 576P, 720P, 1080I, 1080P With VIDEO or S-VIDEO input:
- All signals
• If noise appears at the screen edges when
" Off is selected, set the function to a larger
value.
HDMI Settings
Signal Type