A
Andrea LopezSep 2, 2025
Why is my Acer UL6500 picture green on HDMI (Component)?
- MMeredith AdamsSep 2, 2025
If the picture on your Acer Projector appears green when using HDMI (Component), try changing the input signal type setting.
To Next PageTo Next PageWhy is my Acer UL6500 picture green on HDMI (Component)?
If the picture on your Acer Projector appears green when using HDMI (Component), try changing the input signal type setting.
Why is color faded or poor on Acer UL6500 Projector?
If the color on your Acer Projector appears faded or poor, try adjusting the "Color" and "Tint" settings in "PICTURE > Advanced" and lower the "BrilliantColorâ„¢" value.
Why is the remote control not working on my Acer UL6500?
If the remote control isn't working with your Acer Projector, try these steps: point the remote control directly at the projector's remote control sensor, ensure the remote is within range of the projector, shield the projector's sensor from direct sunlight or strong fluorescent light, and check if the batteries are depleted or incorrectly inserted.
How to fix Acer Projector when picture appears but no sound is heard?
If your Acer Projector displays a picture but you hear no sound, check the following: ensure the cables are correctly connected, verify that the volume isn't set to the minimum, and if connected to an external device, make sure its volume isn't set too low, as this can prevent sound output even if the projector's volume is turned up.
Why is the image blurred on my Acer UL6500 Projector and has noise?
A blurred picture with noise on your Acer Projector can occur for several reasons: the focus may need adjustment, the projection distance might exceed the focus range, fog may have formed on the projection window due to temperature changes, or synchronization adjustments may be needed. Also, noise may appear depending on the computer. If condensation has formed, remove the power cord and wait for it to clear. Setting up the projector one hour before use may also help.
What to do if my Acer UL6500 Projector has sound but no picture?
If you hear sound but don't see a picture on your Acer Projector, or the picture is very dark, consider these possibilities: the cables might be incorrectly connected, the brightness setting could be at its minimum, the computer's signal output setting might not be switched to external output, you may be in 3D viewing mode or the temperature inside the projector may be too high. If the high temperature continues, the picture may become dark.
What to do if the Acer UL6500 Projector image sometimes flickers?
If the image on your Acer Projector flickers, it might be due to incorrectly connected cables or improperly working connected equipment. Check these connections to resolve the issue.
General
