Remote Control Layout
# Function Description
1 POWER Refer to the "Turning the Projector On/Off" section.
2 LIGHT Turns on or off the back light of the remote control.
3 STATUS Press to display or close the I/O port message on the
upper right corner.
4 FREEZE To pause the screen image.
5 HIDE Press "HIDE" to hide screen image; press again to
display the image.
6 HDMI 1 To change source to HDMI 1.
7 MENU Launches the Onscreen Display (OSD) menu, returns to
the previous step for the OSD menu operation or exits
the OSD menu.
8 ENTER Confirms your selection of items.
9 BACK Cancels your selection, or goes back to previous page.
10 Four
directional
selection
keys
Selects items or makes adjustments to your selection.
11 BRIGHT Press to open the brightness menu for adjusting
brightness settings.
12 CONTRAST Press to open the contrast menu for adjusting contrast
settings.
13 SHARP Press to open the sharpness menu for adjusting
sharpness settings.
14 SOURCE Changes the active source.
To Next Page
Loading...
