9.3 APP Function Introduction
● You can use this function for self-creation, such
as doodling, writing, etc. You can also access your
phone album or take photos for engraving.
● This function can be used to control the machine
movement and also to bring the machine back into
position.
● Get the material provided by ACMER for you to
engrave.
● You can store the programs generated by the
computer software to the TF card, and then access
the files in the TF card for offline engraving through
this function.
9.4 Operation Demo
① Select “Material”.
01 02
03 04
05 06
07 08
09 10
11 12
13 14
15 16
17 18
19 20
21 22
23
24
25 26
27 28
29 30
31 32
33 34
To Next Page
Loading...
