Acom 1200S - Storage and Shipment Guidelines

User's Manual | ACOM 1200S | 1.8-54 MHz Linear Power Amplifier
August 2021
S e c t i o n SPECIFICATIONS | Page
55
of
60
8.3. Storage and Shipment
8.3.1. Storage Environment
The amplifier may be kept packed in a dry, ventilated and unheated location (with no chemically active
substances such as acids or alkalis) within the following environment ranges:
• Temperature range: -40 to +70 degrees Celsius (-40
o
F to 158
o
F);
• Humidity: up to 75% @ +35 degrees Celsius (95
o
F).
8.3.2. Shipping Size and Weight
• WxDxH: Approx. 550x540x360 mm, 19.0 kg (21.7x21.3x14.2 inches, 41.9 lbs.);
Figure 8-1 Packaging cardboard box
Figure 8-1 Packaging cardboard box
8.3.3. Transportation
All types of transportation may be used, including storage in an aircraft baggage compartment at up to
12000 meters (40000 ft) above sea level.
8.3.4. Returning to the Service Provider
NOTICE
Should it be necessary to ship the amplifier, use the original packing as described below.
Switch off the amplifier, pull the line (mains) plug out of the outlet, disconnect all cables from the rear
panel of the amplifier (remove the ground connection the last), and then pack the amplifier in its original
carton.