Acond PRO-N - Swimming Pool; Fault Display

Heat pumps AIR / WATER
Operation manual 27
3.2.9 Swimming pool
The Swimming Pool panel is operated by pressing the Swimming Pool button on the bottom bar
of the main screen (Figure 9).
When the pool heating is switched on, the reverse temperature (accumulation
container) is set to
45 °C. Heating of the pool occurs only when the living rooms are flooded.
3.2.10 Fault display
In the event of a malfunction, a red bar appears on the dark blue bar at the top of the page with
the malfunction code and description and the Confirmation button to confirm the malfunction
after removal (Figure 10).
Figure 10 From the fault display on the web page
Figure 9 Sun and pool windows