Heat pumps AIR / WATER
Operation manual 4
Attention, unit contains flammable coolant!
In case of fire, disconnect the device from the power source and call 112!
Handling open flame near the outdoor unit is prohibited!
Do not use chlorine on stainless steel surfaces and avoid abrasive materials and
wires!
Stainless steel surfaces can be treated:
• Special preparations for stainless materials that polish and protect the surface
• Detergent can be used for degreasing
Due to the risk of damage to the heat pump casing, do not use any spray types
in its vicinity. This applies in particular for:
• Solvents
• Chlorine cleaning products
• Paints
• Adhesives
2.1.4 Installation and maintenance
• Follow applicable local regulations.
• Install the heat pump only in the outdoor environment or in machine rooms that comply
with ČSN EN 378-3!
• Do not install heat pumps in ventilation systems!
• Do not narrow or stop the directing air sides of the heat pump!
• Never start the heat pump if the fan cover is removed!
• Installation, maintenance and repairs must only be carried out by authorised technicians
(see chapter 8 Links)
To Next Page
Loading...