Acond PRO-N - Risk of Death by Electric Shock; Danger of Injury Due to Icing; Service Inspections and Maintenance

Heat pumps AIR / WATER
Operation manual 5
2.1.5 Risk of death by electric shock
• Disconnect the mains voltage completely and take precautions against accidental
switching on before opening the heat pump or before working on electrical parts.
• Only instruct a professional electrician to carry out work electrical connections and work
on electrical parts.
• Follow the relevant EN, VDE or locally applicable safety regulations when installing and
performing electrical work.
2.1.6 Danger of injury due to icing
At the air outlet of the heat pump, the air temperature is within the approximate
range of 5° C below the surrounding temperature, and therefore the surrounding
area may be icy and slippery. Therefore, install the heat pump in a manner that
does not allow the out flowing air to interfere with pedestrian paths.
2.2 Service inspections and maintenance
The operator is responsible for the safety and environmental flawlessness of the
heat pump. If the refrigerant leaks from a leaking place, it may cause personal
injury or damage to the environment.
If you detect a leak that leaks refrigerant, disconnect the heat pump from the mains and secure
it against accidental switching on (e.g. written warnings at the circuit breaker). Inform customer
service.
RISK OF INJURY! Only authorised refrigeration technicians may work on the
refrigerant circuit, see chapter 8 Links