EasyManua.ls Logo

Acond PRO-N - Safety; Personal Protective Equipment; Fire Safety Equipment

Acond PRO-N
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Heat pumps AIR / WATER
Operation manual 3
The equipment must not be operated by persons with reduced mental abilities
or lack of experience and knowledge (including children) unless under the
supervision of instructed persons responsible for their safety.
2.1 Safety
Operation of the equipment is safe when properly used.
The design and set-up of the equipment complies with the relevant DIN/VDE regulations.
Every person working on the machine must read, understand and follow the relevant
instructions before starting work.
Any person performing work on the equipment must comply with locally applicable
occupational safety and other safety regulations. This applies in particular to the use of
personal protective clothing.
2.1.1 Personal protective equipment
Every person performing maintenance, repair and recuperation must wear
protective gloves and eye protection.
2.1.2 Fire safety equipment
The equipment is safe under normal conditions. In the event of unforeseeable circumstances
and improper operation of the equipment, its damage and fire may occur. In order to extinguish
a fire, it is necessary to use extinguishers suitable for extinguishing electrical equipment, i.e.
Powder extinguisher
Foam extinguisher
Gas extinguisher
Attention, unit contains flammable coolant!
In case of coolant leakage, disconnect the device from the power supply
and contact service!

Table of Contents