Heat pumps AIR / WATER
Operation manual 2
1. Explanation of symbols, Documentation validity
1.1 Used symbols
Important information not including either hazards posed to persons or material
valuables are indicated in white text and highlighted in blue. They are separated
from text by commas above and below it.
Warning remarks in the text are indicated by a red warning triangle with a white
exclamation point and enclosed by a frame.
1.2 Documentation validity
The instructions specified herein are valid for ACOND PRO® air/water heat pumps with
ACOND® THERM regulation with SW versions 140.1x a 140.2x.
If these instructions are not followed during installation, operation and maintenance, then the
obligations of ACOND a.s. stemming from the terms of the warranty shall cease to apply.
ACOND a.s. hereby reserves the right to make changes to any parts of the documentation and
specifications without prior notice.
© 20/04/2021 Copyright ACOND a.s.
2. Important information
If the system is not used in winter or cannot be started due to operational
reasons (e.g. due to a serious malfunction) and is not filled with
antifreeze, water must be drained from the heating system, otherwise
there is a risk of frost damage to the system.
!! Do not disconnect the heat pump from the power supply for a longer
period (several days)!!
Back-up battery may be discharged, control software may be deleted and
data may be lost. Any trip of the technician will be charged according to
the current price list of Acond a.s.
To Next Page
Loading...