12
Appendix
Cleaning the clock
Do not use cleaning products that contain alcohol or other strong chemicals as
they could discolor or crack the clock housing. Use a soft damp cloth to remove
dirt. Wipe dry.
Wall Mounting Instructions
The BioTouch clock can be placed on a table or desk and it can also be mounted
to a wall using the included wall bracket.
Use the bracket to mark (3) screw holes on the wall. Use the included screws
and wall anchors (if necessary) to securely attach the bracket to the wall.
Attach the clock to the bracket using the included machine screw.
• Do not place the clock in direct sunlight. Bright light may significantly affect
finger readings or cause finger verification to fail.
• The clock is designed for indoor use in a temperature range of 32-104º F (0-
40º C). The clock is not waterproof or shockproof. Keep the clock away from
heat sources such as radiators. Avoid dusty environments or exposure to
chemicals.
• Avoid locations where the device will be susceptible to vibrations and shock,
such as a slamming door.
• The clock warranty does not cover defects or damages arising from improper
installation.
To Next Page
Loading...