46
Time Table Program Features
The time table function allows I-Mark™ "*" printing (Irregular registration Mark), an External
Time Signal and a Built-in Buzzer. These functions can be programmed for each day of the week
and each time period. Use the I-Mark™ "*" (asterick prints) to indicate punches earlier or later
than scheduled. The "External Signal" and the "Built-in Buzzer" are available only when "Optional
Board" is connected to the unit.
I-Mark™
I-Mark™ was created to help identify irregular punches outside of a set schedule.
Example 1: The time table program is explained in Time Table Example 1 and Time Table Based
on Example 1 below.
Time Table Example 1
Time Table Based on Example 1
Other Notes on I-Mark™:
• I-Mark™ "*" is not printed for the time period with no program setting.
• Up to 48 programs can be set (Program No. 1 through Program No. 48).
• Once the I-Mark™ "*" is programmed, you must set program off.
P
ROGRAM NO.
D
AY OF THE
WEEK
TIME I-MARK™ "*"
01 Mon. – Sat. 9:00 ON
02 Mon. – Sat. 17:30 OFF
To Next Page
Loading...
