Need help?Do you have a question about the Active Vision SX-420 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Compression | H.264 |
| Remote Viewing | Yes |
| Operating System | Embedded Linux |
| Video Output | BNC, VGA |
| Audio Output | 1 RCA |
| Recording Frame Rate | 30 fps |
| Hard Drive Support | 1 SATA HDD |
| Mobile App Support | Yes |
| Network Interface | RJ45 |
| USB Ports | 2 USB 2.0 |
Describes warning symbols used in the manual, including caution for electric shock and important operation instructions.
Details the indication lamps and buttons on the front panel of the DVR, explaining their functions.
Describes the rear panel connections and their functions, including video, audio, and network ports.
Guides through the initial setup and password entry process for the DVR.
Explains how to set live display parameters like OSD, sequence, and resolution.
Covers setting resolution, frame rate, quality, and recording modes for video.
Details how to configure motion sensing zones within the recording setup.
Explains how to set up a recording schedule using different modes and time zones.
Covers device-specific settings like ALARM-OUT, PTZ, and SPOT CHANNEL.
Details alarm output settings, sensor inputs, and alarm duration.
Explains how to connect and configure PTZ cameras.
Describes how to operate PTZF functions using the remote controller.
Covers system-wide parameters like DVR ID, date, time, and language settings.
Details password settings for administrator, user, and network access.
Covers network configuration, ports, client access, and network types.
Explains network port configuration and access beyond routers.
Describes LAN and DHCP network connection types.
Covers storage settings like overwrite and disk formatting.
Instructions on how to preserve the changed configuration settings.
Displays live video from cameras and explains indicator icons.
Guides on how to search for stored video using date, channel, and type filters.
Details how to play back recorded video and navigate through recorded events.
Explains how to capture still images or video for archiving.
Describes the process of transferring captured images or video to a USB device.
Introduces the remote monitoring software and its capabilities.
Lists the hardware and software specifications needed for the client software.
Provides step-by-step instructions for installing the client software.
Instructions to launch the live viewer application after installation.
Describes the main graphical interface of the network client software.
Explains the function of various buttons and connection dialogs in the client software.
Guides on accessing search and playback functions within the client software.
Shows the main user interface for search and playback.
Details the control panel elements for search and playback.
Explains how to configure DVR settings through the client software.
Covers general system settings like security options and save paths.
Describes how to view and manage channel information and titles.
Explains how to set event items, disk capacity, and log save paths.
Details how to set recording conditions for different event types and channels.
Covers local disk settings, capacity, and overwrite behavior.
Step-by-step guide for registering the DVR with a DDNS service.
Instructions for configuring DVR settings related to DDNS.
Guide on how to use the client program to connect to the DVR.
To Next Page