PROBABLE CAUSE REMEDY
PROBLEM
No power
Battery is too warm
— red LED blinks on Battery
Let the Battery cool down
Battery is too cold
— below -10°C (14°F)
Let the Battery warm up
Battery not charged Check Battery, charge when empty
Power Supply not switched on Activate Power Supply
Too short a press on Power Button Press for 2 seconds
Emergency Stop engaged Disengage Emergency Stop
Power LED turns red
Emergency Stop engaged Disengage Emergency Stop
Problem with Battery or Power Supply Try another Battery or Power Supply
Error detected in Ascender Restart: LED Green — OK
LED Red — Contact ActSafe
distributor or ActSafe
Remote control does not connect
Ascender is not switched on Switch Ascender on
Distance too far Get closer to Ascender
Signal interference
Get closer to Ascender
Remote Control from another Ascender Find correct Remote Control
62