ACU-RITE 01010 - Select Measurement Units

10
lc'=38 PM
.
SET
UNIT57
T •
T SET .A.
lc'=38 PM
.
WIN]
mPH
T
T SET .A.
Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the “ ▲ ” or “ ▼ ” buttons until
“SET UNITS?” is displayed on the
Selectable Category part of the display unit.
2. Press the “SET” button to set the unit
preference.
3. Press the “ ▲ ” or “ ▼ ” to select “STAND” for
standard or “METRIC” for metric units.
4. Press the “SET” button to conrm your selection.
5. Next, you will see “WIND MPH”. Press the
“ ▲ ” or “ ▼ ” to select MPH, KPH, or KNOTS
for wind speed units.
6. Press the “SET” button to conrm your selection.
Units are now set.