ACU-RITE 01036 - Measurement Units; Set Language

10
Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the “ ▲ “ or “ ▼ “ buttons until “SET UNITS?”
is displayed on the Selectable Category part of
the display.
2. Press the “ ” button to set the unit preference.
3. Press the “ ▲ “ or “ ▼ “ buttons to select “STAND”
for standard or “METRIC” for metric units.
4. Press the “ ” button to conrm your selection.
5. Next, you will see “WIND MPH”. Press the
“ ▲ “ or “ ▼ “ buttons to select MPH, KPH, or
KNOTS for wind speed units.
6. Press the “ ” button to conrm your selection.
Units are now set.
Set Language
To select between English (default) or French for the display language:
1. Press the “ ▲ “ or “ ▼ “ buttons until “SET LANG?” is displayed on the
Selectable Category part of the display.
2. Press the “ ” button to set the language preference.
3. Press the “ ▲ “ or “ ▼ “ buttons to select the desired language.
4. Press the “ ” button to conrm your selection.
Language is now set.
Note: Display reverts to English language when display runs out of power or is
reset.