5
Display Placement
Place display in a dry area free of dirt and dust. Display is magnet mountable
and has a fold-out stand for tabletop use. For wall mounting, hang using the
keyhole located on the back of the unit.
Sensor Placement
• Both sensors will work in either the refrigerator or freezer, however the
default alerts are set based on the sensor's indicated use (see page 2).
• Each sensor is equipped with a silicon band to securely attach to a wire shelf.
• Each sensor also includes a detachable suction cup that can be used to attach
the sensor to the interior surface of the refrigerator. Please note: suction cups
do not adhere well to freezing surfaces.
• Display and sensors must be located within 75 ft (23 m) of each other.
To Next Page
Loading...
