APPLIANCE DESCRIPTION
MODELS
Comfort E 100 - 130 - 160 - 210 - 240
Storage water tanks, to be installed vertically on the wall, that can work within a heating installa-
tion, or independently as electric domestic hot water heater only. The Comfort E tank is equipped
with one 2200 W heating element controlled by the thermostat and by the Summer/Winter switch
on the appliance control panel.
Key
1. Cold water inlet
2. Domestic hot water outlet
3. Manual air bleed valve
4. Primary uid inlet
5. Primary uid outlet
6. 30 mm of insulation in polyurethane (without CFCs)
7. Primary carbon steel tank
8. DHW stainless steel tank
9. Rigid polypropylene cover
10. External polypropylene casing
11. Stainless steel dry-well
12. Electric heating element 2200 W
13. Control panel
To Next Page
Loading...
