Ada MP-1 - Page 22

ADA MP-1 Owner’s manual
SET PARAMETERS
<F0> SYSEX
<00> ADA Identifier
<cc> Channel number
<dd> Device number
<06> Set parameter command
<PP> Program number
<NN> Number of parameters
<bb> Base parameter number
<V1> Parameter 1 value
.
.
.
<V
N
> Parameter n value
<xx> Message checksum
<F7> EOX
SET PARAMETERS RESPONSE
<F0> SYSEX
<00> ADA Identifier
<cc> Channel number
<dd> Device number
<00> Response 10
<06> Response type
<xx> Message checksum
<F7> EOX
.Sets one or more parameters in a program.
.Program number 7F specifies the current working parameter registers.
.A zero response indicates no errors were detected, a non-zero response indicates that a
bad parameter number or value was detected.
Page 22 of 26