Adaptive Micro Systems BetaBrite 1036 User Manual

BETA BRITE Programming Manual
Introduction: Installation 3
Ceiling mount
Counter mount
X
X
Ceiling bracket
Ceiling
This mounting chain and ceiling hook (not supplied) must
be able to support at least four times the weight of the sign.
Top view
Side view
Front
view
1. Attach the ceiling brackets to the sign using the screws supplied.
2. Hang the sign from the ceiling using mounting chains and ceiling
hooks (not supplied). The chains and hooks must be able to support at
least four times the weight of the sign.
3. Plug the power cord into the sign and into a nearby outlet.
Front view
Top view
Power cord
Washer
1. Attach the mounting brackets to the counter, 24 5/8 inches (62.7 cm)
on center.
2. Plug the power cord into the sign.
3. Attach the sign to mounting brackets using hardware as shown.
NOTE: On the end with the power cord, use the spacer provided,
not a washer.
4. Plug the power cord into an outlet.
Screw
Bracket
Lock
washer
Spacer
Screw
Bracket
Lock
washer

Adaptive Micro Systems BetaBrite 1036 Specifications

General

Brand	Adaptive Micro Systems
Model	BetaBrite 1036
Category	Monitor
Language	English