BETA BRITE Programming Manual
22 Advanced text messaging: Example 6 — Displaying the time and date
Advanced text messaging
Before attempting the following, make sure you’re familiar with the
previous examples in the “Beginning text messaging” section of this
manual.
Example 6 — Displaying the time and date
NOTE: Because the time and date are not updated when the sign is
off, the time and date must be re-programmed each
time the
sign is turned off and on.
Step When you do this... You see this...
In this example, we’ll create a message that continuously displays the current time and date:
1
Delete all the messages currently stored in the sign.
(See “Example 5 — Deleting messages” on page 21.)
2 Press PROGRAM.
3 Press SELECT.
4 Press A.
5
Press MODE to select a
“mode”. (Modes are used
to change the way a
message appears. See
Appendix A for a list of the
modes available.)
6
Press SELECT until the
Roll Down — [RL
↓] —
mode appears.
Rosco
Advertising
THEN
3:26 PM
THEN
THEN
Jan. 19, 2006
The time will be displayed
in wide letters.
PROG TEXT A
PROG TEXT ?
A]
This stands for Hold mode.
A] [HLD]
This stands for Roll Down mode.
A] [RL↓]
To Next Page
Loading...
Need help?
General
