Why is my Adastra Amplifier overheating or cutting out?
If the Adastra Amplifier is overheating or cutting out, check that 8Ω speakers are not connected to 100V terminals. Ensure the total 100V speaker wattage is lower than the amplifier rating and that 100V and 8Ω speakers are not both connected.
What to do if Bluetooth cannot connect to Adastra UM?
If you're having trouble connecting a Bluetooth device to your Adastra Amplifier, make sure the sending device is within the Bluetooth range (5-10m). Also, verify that the connected device is the correct ID.
What to do if Adastra UM is overheating or cutting out?
If your Adastra Amplifier is overheating or cutting out, check that 8Ω speakers are not connected to the 100V terminals. Make sure the total 100V speaker wattage is lower than the amplifier's rating. Also, ensure that 100V and 8Ω speakers are not both connected simultaneously.
How to fix microphone feedback from Adastra Amplifier?
To reduce feedback from the microphone when using your Adastra Amplifier: Face the microphone away from the speakers and monitors. Additionally, turn down the MIC and/or MASTER level.
What to do if there is no audio from connected Bluetooth device on Adastra Amplifier?
If you're not getting any audio from a Bluetooth device connected to your Adastra Amplifier, first ensure that the volume controls are not turned down on the sending device. Also, check the volume and Play/Pause buttons to ensure Bluetooth is not muted.
How to troubleshoot no power LED on the control panel of Adastra Amplifier?
If there is no power LED on the control panel of your Adastra Amplifier, ensure the IEC lead, mains switch, and inlet fuse are properly connected and functional. If you're using a 24Vdc power input, check that the battery is charged.
What to do if power LED is on but no other LEDs and no output on Adastra UM Amplifier?
If the power LED is on but no other LEDs and no output on your Adastra Amplifier, check the input signals and the condition of the input connection leads. Also, check that the MASTER, MIC, LINE IN, or MEDIA controls are turned up.
Why are power light and output LEDs lighting but no output on my Adastra UM?
If the power light and output LEDs are lighting but there is no output from your Adastra Amplifier, check that the speaker output terminals are connected correctly. Also, check that the speakers are working by testing them on another amp if available.
What to do if my Bluetooth cannot connect to Adastra UM Amplifier?
To troubleshoot Bluetooth connectivity issues with your Adastra Amplifier, first, ensure the sending device is within the Bluetooth range (5-10m). If it's in range, check that the connected device is the correct ID.
How to fix no power LED on Adastra Amplifier control panel?
If there is no power LED on the control panel of your Adastra Amplifier, ensure the IEC lead, mains switch, and inlet fuse are properly connected and functional. If you're using a 12Vdc power input, check that the battery is charged.
General| Inputs | RCA |
|---|---|
| Outputs | Binding Post |
| Power supply | 230Vac, 50Hz |
| Protection | Overload, short circuit |
| Frequency Response | 20Hz - 20kHz |
To Next Page
