30
d. Using the directional arrows, highlight Recording. You should see the name of the program
that is being recorded along with a red dot.
Revise the Recording of a LIVE Program
1. With the program that is currently being recorded on the screen, press OK.
2. You will see the following options:
a. Stop Recording
b. Expanded Info
c. Cancel
Stop the Current Recording
1. Using the directional arrows, highlight Stop Recording and press OK.
2. A pop-up box with the question “Would you like to stop recording?” To exit, select no. To stop
recording, select yes.
Extend the Current Recording Time
1. Press the Menu button
2. Using the directional arrows, highlight DVR and press OK.
3. Using the directional arrows, highlight Schedule Event and press OK
4. You will now be able to extend the minutes of recording from 1 minute up to 60 minutes by:
a. Using the directional arrows, highlight the minute’s field and press OK.
b. You will now see one arrow on each side of the field, using the directional arrows, press the
right or left arrow to select the number of minutes to extend recording.
c. To keep the number of minutes, using the directional arrows, highlight OK and press OK.
d. To cancel, using the directional arrows, highlight Cancel and press OK.
Record a FUTURE Program
1. Once you have found a program that will be shown in the future that you would like to record,
press OK.
2. You will see the following options:
a. Schedule Event
b. Record Program
c. Record Series
d. Set Reminder
e. Set Autotune
f. Expanded Info
To Next Page
Loading...
Need help?
General
