To Next Page

To Previous Page

Home Station ADSL ADB P.DG A4001N

20 Hardware Installation

These settings can be changed to fit your network requirements, but you must first

configure at least one computer to access the Home Station ADSL's web configura-

tion interface in order to make the required changes.

ETHERNET CONNECTION >>

TCP/IP PROTOCOL

INSTALLATION

This procedure requires the TCP/IP protocol installed on your computer. Refer to the

following chapters and to your Windows and MacOS operating systems manuals.

Microsoft Windows 2000

1. Put in the CD-ROM drive your Windows installation CD-ROM.

2. Starting from Start -> Settings -> Control Panel or Start -> Control Panel depend-

ing on the configuration of your computer.

3. Make a double click on the Network and Dial-up Connections icon.

4. Select the interested Network Adapter icon and from the contextual menu, do

select the Properties item.

5. If the Internet Protocol (TCP/IP) component is not checked you must enable it

by checking the Internet Protocol (TCP/IP) item; otherwise, if it is not listed, you

must install it by selecting the Install... button.

6. Choose the Protocol Network component and click on the Add.. button.

7. In the Select Network Protocol panel, do choose Internet Protocol (TCP/IP) and

the OK button.

8. After rebooting, you're ready to configure the TCP/IP setting, as described in the

following paragraphs.

Microsoft Windows XP

TCP/IP stack is considered a core component of the operating system, so it cannot

be installed or uninstalled. You must check in this case that Internet Protocol

(TCP/IP) is enabled. To do so, follow these steps:

1. Starting from Start -> Settings -> Control Panel or Start -> Control Panel de-pending

on the configuration of your computer.

2. Make a double click on the Network Connections icon.

3. Select the Network Adapter icon and from the contextual menu, do select the

Properties item.

4. In the General TAB panel, verify that Internet Protocol (TCP/IP) item is checked; if

not, do check it and click on the OK button.

ADB P.DG A4001N User Manual

Questions and Answers: