Home Station ADSL ADB P.DG A4001N
© (2011) ADB Broadband S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Wireless Section 75
checking the Remove check-box and by clicking on the Remove button, the selected
MAC address will be removed from the list.
FIGURE 3. Wireless MAC Filter Panel
WIRELESS BRIDGE
This page allows you to configure wireless bridge features of the wireless LAN inter-
face. You can select Wireless Bridge to disables access point functionality.
Selecting Access Point enables access point functionality. Wireless bridge function-
ality will still be available and wireless stations will be able to associate to the AP. Se-
lect “Disabled” in Bridge Restrict disables wireless bridge restriction. Any wireless
bridge will be granted access.
By selecting “Enabled” or “Enabled(Scan)”, it enables wireless bridge restriction. On-
ly those bridges selected in Remote Bridges will be granted access.
Click "Refresh" to update the remote bridges. Wait for few seconds to update.
Click "Apply/Save" to configure the wireless bridge options.