Home Station ADSL ADB P.DG A4001N
© (2011) ADB Broadband S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Device Info Section 37
xDSL BER Test. A Bit Error Rate Test (BER Test) is a test that reflects the ratio of
error bits to the total number transmitted.
If you click on the xDSL BER Test button at the bottom of the xDSL Statistics
screen, the pop-up window shown in Figure 7 will appear.
Upon test duration choice (in seconds), and by pressing the
Start
button, the test
will start running. At its end a result page will be shown.
Do close this page by selecting the
Close
button.
FIGURE 7. xDSL BER Test Panels
Start phase