ADDER AdderLink Digital iPEPS User Manual

 




26
Inputs
Inputs:
When set to ‘Enabled’, all primary
options below are ticked. The
‘Disabled’ setting unticks all of the
primary options (causing ‘view-only
mode’ where no control data may
be sent to the Digital iPEPS. The
‘Custom’ setting is shown if you
choose your own combination of
options.
Enable keyboard input
Allows keyboard data to be
transferred to the Digital iPEPS.
Pass special keys directly to server
When ticked, ‘special’ keys (the
Windows key, the Print Screen
key, Alt+Tab, Alt+Escape and
Ctrl+Escape) are passed directly to
the Digital iPEPS rather than being
interpreted locally.
Enable mouse input
Allows mouse data to be transferred to the Digital iPEPS.
Enable 3-button mouse emulation
This feature allows you to use a 2-button mouse to emulate the middle button
of a 3-button mouse. When enabled, press the left and right mouse buttons
simultaneouslytocreateamiddlebuttonaction.Youareadvisedtogenerally
use a 3-button mouse.
Rate-limit mouse move events
When ticked, this feature reduces the mouse movement information that is sent
to the Digital iPEPS and host system. This is useful for slow connections and you
will notice that the remote cursor will catch up with the local cursor roughly
once every second.
Share clipboard with server
This permits the “Paste Clipboard” operation (see Keyboard control), and the
“Create VM Drive” feature of Virtual Media (see Virtual Media).
Enable file transfer
This permits the “file transfer” method of Virtual Media (see Virtual Media).
Menu key
This feature allows you to select which function key is used to display the VNC
viewer options menu. The menu key is the only way to exit from the full screen
viewer mode.

ADDER AdderLink Digital iPEPS Specifications

General

Brand	ADDER
Model	AdderLink Digital iPEPS
Category	Extender
Language	English