34
EDID configuration
Click this button to display advanced EDID options that do not normally require alteration.
This page allows you to edit the contents of the EDID records that are used to
inform the computer of the supported video modes. The default EDID should be
sufficient for the vast majority of situations. If necessary, use the Edit Preferred and
Standard Timing button fine tune settings to support specific situations.
When you click the Save button, the EDID information within the unit will be
updated. As the EDID is usually only read when a computer is booted, it may be
necessary to power cycle the host computer to make it re-read the new EDID.
To Next Page
Loading...
Need help?
General
